!
! Century Systems NXR-G110 Series ver 21.7.15 (build 6/11:47 13 12 2021)
!
hostname nxrg110
telnet-server enable
telnet-server ip forbidden-access-wan
telnet-server ipv6 forbidden-access-wan
http-server enable
http-server ip forbidden-access-wan
http-server ipv6 forbidden-access-wan
no rest http enable
no rest https enable
!
!
system power-management mode balance
!
!
!
ipv6 forwarding
no fast-forwarding enable
!
!
!
!
ppp account username [PPP接続用ユーザID] password [PPP接続用パスワード]
!
!
l2tp udp source-port 40001
!
!
!
!
!
interface ppp 0
 no ip address
 ipv6 access-group in ppp0_IN
 ipv6 spi-filter
 ipv6 nd accept-ra proxy ethernet 0
 ipv6 dhcp client IPv6DHCPC
 ipv6 tcp adjust-mss auto
 ppp username [PPP接続用ユーザID]
 no ppp ipcp enable
 ppp ipv6cp enable
 dial-up string *99***1#
 dial-up timeout 30
 mobile apn [APN] cid 1 pdp-type ipv6
!
interface ethernet 0
 no ip address
 ipv6 address autoconfig
 ipv6 nd other-config-flag
 ipv6 nd ra-dns-server dhcp-client ppp 0
 ipv6 nd send-ra
 ipv6 dhcp server IPv6DHCPS
!
interface ethernet 1
 no ip address
!
dns
 service enable
!
!
syslog
 local enable
 exit-syslog
!
!
ipv6 dhcp-client IPv6DHCPC
 information-only enable
 option-request dns-servers
!
ipv6 dhcp-server IPv6DHCPS
 option-send dns-server add ipv6 dhcp-client ppp 0
!
mobile 1 ppp 0
mobile 1 carrier [キャリア]
mobile error-recovery-reset
mobile termination-recovery reset
!
!
!
!
!
!
!
!
!
ipv6 route ::/0 ppp 0
!
!
ipv6 access-list ppp0_IN permit any any icmpv6
ipv6 access-list ppp0_IN permit any any udp any 546
!
!
!
end