! ! Century Systems NXR-G100 Series ver 6.19.4 (build 3/11:55 12 04 2019) ! DIP-SW : 1:off 2:off 3:off 4:off ! USB transfer-mode : dma ! hostname nxrg100 telnet-server enable http-server enable ! ! system power-management mode balance ! ! ! ipv6 forwarding fast-forwarding enable ! ! ! ppp account username test1@example.jp password test1pass ! ! interface ppp 0 ip address negotiated ip tcp adjust-mss auto ip masquerade ip spi-filter ppp username test1@example.jp ! interface ethernet 0 ip address 192.168.10.1/24 ipv6 address dhcpv6pd ::/64 eui-64 ipv6 nd send-ra ! interface ethernet 1 no ip address ipv6 access-group in eth1_in ipv6 spi-filter ipv6 nd accept-ra ipv6 dhcp client ipv6dhcpc pppoe-client ppp 0 ! dns service enable timeout 5 edns-query enable ! syslog local enable ! dhcp-server 1 network 192.168.10.0/24 range 192.168.10.200 192.168.10.210 gateway 192.168.10.1 dns-server 192.168.10.1 ! ! ipv6 dhcp-client ipv6dhcpc ia-pd dhcpv6pd option-request dns-servers ! ! ! ! ! ! ! ! ! ip route 0.0.0.0/0 ppp 0 ! ipv6 access-list eth1_in permit any any icmpv6 ipv6 access-list eth1_in permit any any udp any 546 ! ! ! end