!
! Century Systems NXR-G100 Series ver 6.19.4 (build 3/11:55 12 04 2019)
!    DIP-SW : 1:off 2:off 3:off 4:off
!    USB transfer-mode : dma
!
hostname nxrg100
telnet-server enable
http-server enable
!
!
system power-management mode balance
!
!
!
ipv6 forwarding
fast-forwarding enable
!
!
!
ppp account username test1@example.jp password test1pass
!
!
interface ppp 0
 ip address negotiated
 ip tcp adjust-mss auto
 ip masquerade
 ip spi-filter
 ppp username test1@example.jp
!
interface ethernet 0
 ip address 192.168.10.1/24
 ipv6 address autoconfig
 ipv6 nd send-ra
!
interface ethernet 1
 no ip address
 ipv6 access-group in eth1_in
 ipv6 spi-filter
 ipv6 nd accept-ra proxy ethernet 0
 ipv6 dhcp client ipv6dhcpc
 pppoe-client ppp 0
!
dns
 service enable
 timeout 5
 edns-query enable
!
syslog
 local enable
!
dhcp-server 1
 network 192.168.10.0/24 range 192.168.10.200 192.168.10.210
 gateway 192.168.10.1
 dns-server 192.168.10.1
!
!
ipv6 dhcp-client ipv6dhcpc
 information-only enable
 option-request dns-servers
!
!
!
!
!
!
!
!
!
ip route 0.0.0.0/0 ppp 0
!
ipv6 access-list eth1_in permit any any icmpv6
ipv6 access-list eth1_in permit any any udp any 546
!
!
!
end