!
! Century Systems NXR-G100 Series ver 6.19.3 (build 1/11:34 18 01 2019)
!    DIP-SW : 1:off 2:off 3:off 4:off
!    USB transfer-mode : dma
!
hostname nxrg100
telnet-server enable
http-server enable
!
!
system power-management mode balance
!
!
!
ipv6 forwarding
no fast-forwarding enable
!
!
!
!
!
interface ethernet 0
 ip address 192.168.0.254/24
!
interface ethernet 1
 no ip address
!
interface bridge 0
 bridge port 1 ethernet 0
 bridge port 1 access-group in br0_eth0-in
 bridge port 1 access-group forward-in br0_eth0-forward-in
 bridge port 2 ethernet 1
 ip address 192.168.10.1/24
!
dns
 service enable
!
syslog
 local enable
!
!
!
!
!
!
!
!
!
!
bridge access-list br0_eth0-forward-in permit 1 arp
 sender-mac 00:80:6D:XX:XX:00
 sender-ip 192.168.10.100
 target-ip 192.168.10.10
!
bridge access-list br0_eth0-forward-in permit 2 arp
 sender-mac 00:80:6D:XX:XX:02
 sender-ip 192.168.10.102
 target-ip 192.168.10.11
!
bridge access-list br0_eth0-forward-in permit 3 ip
 mac source 00:80:6D:XX:XX:00
 source 192.168.10.100
 destination 192.168.10.10
 protocol tcp
 destination-port 80
!
bridge access-list br0_eth0-forward-in permit 4 ip
 mac source 00:80:6D:XX:XX:02
 source 192.168.10.102
 destination 192.168.10.11
 protocol tcp
 destination-port 22
!
bridge access-list br0_eth0-forward-in deny 5 any any any
!
bridge access-list br0_eth0-in deny 1 any any any
!
!
!
end