!
! Century Systems NXR-G240 Series ver 9.4.0 (build 10/13:33 13 09 2017)
!    DIP-SW : 1:off 2:off 3:off 4:off 
!
hostname nxrg240
telnet-server enable
http-server enable
!
!
system power-management mode balance
!
!
!
ipv6 forwarding
no fast-forwarding enable
!
!
!
!
!
!
l2tp udp source-port 40001
!
!
!
!
!
interface ethernet 0
 no ip address
 classify input route-map prio_routemap
 ipv6 address autoconfig
 ipv6 nd other-config-flag
 ipv6 nd send-ra
 ipv6 dhcp server ipv6dhcps
!
interface ethernet 1
 no ip address
 ipv6 access-group in eth1_in
 ipv6 spi-filter
 ipv6 nd accept-ra proxy ethernet 0
 ipv6 dhcp client ipv6dhcpc
!
interface ethernet 2
 no ip address
!
dns
 service enable
 edns-query enable
!
!
syslog
 local enable
 exit-syslog
!
!
ipv6 dhcp-client ipv6dhcpc
 information-only enable
 option-request dns-servers
!
ipv6 dhcp-server ipv6dhcps
 option-send dns-server add ipv6 dhcp-client ethernet 1
!
!
!
!
!
!
!
!
!
!
!
ipv6 access-list eth1_in permit any any icmpv6
ipv6 access-list eth1_in permit any any udp any 546
!
!
class access-list class_acl ipv6 any any tcp
!
route-map prio_routemap permit 1
 match ipv6 address class_acl
 set dscp 8
!
!
end