! ! Century Systems NXR-G100 Series ver 6.15.1 (build 5/19:23 28 08 2017) ! DIP-SW : 1:off 2:off 3:off 4:off ! USB transfer-mode : dma ! hostname NXR_B telnet-server enable http-server enable ! ! system power-management mode balance ! ! ! ipv6 forwarding fast-forwarding enable ! ! ! ppp account username test3@example.jp password test3pass ! ! l2tpv3 hostname nxrb l2tpv3 router-id 172.20.20.1 l2tpv3 mac-learning always l2tpv3 path-mtu-discovery enable l2tpv3 fast-forwarding enable ! l2tpv3 tunnel 1 description NXR_A1 tunnel address 10.10.10.1 tunnel hostname nxra1 tunnel router-id 172.20.10.1 ! l2tpv3 tunnel 2 description NXR_A2 tunnel address 10.10.20.1 tunnel hostname nxra2 tunnel router-id 172.20.10.2 ! l2tpv3 xconnect 1 description NXR_A1 tunnel 1 xconnect ethernet 0 xconnect end-id 1 retry-interval 30 ip tcp adjust-mss auto ! l2tpv3 xconnect 2 description NXR_A2 tunnel 2 xconnect ethernet 0 xconnect end-id 1 retry-interval 30 ip tcp adjust-mss auto ! l2tpv3 group 1 xconnect 1 2 mac-advertise enable ! interface ppp 0 ip address negotiated ip tcp adjust-mss auto ip access-group in ppp0_in ip masquerade ip spi-filter ppp username test3@example.jp ! interface ethernet 0 ip address 192.168.10.3/24 ! interface ethernet 1 no ip address pppoe-client ppp 0 ! dns service enable ! syslog local enable ! ! ! ! ! ! ! ! ! ! ip route 0.0.0.0/0 ppp 0 ! ip access-list ppp0_in permit 10.10.10.1 any 115 ip access-list ppp0_in permit 10.10.20.1 any 115 ! ! ! end