!
! Century Systems NXR-120 Series ver 5.24.1M (build 8/18:37 19 11 2014)
!
hostname NXR
telnet-server enable
http-server enable
!
!
!
!
ipv6 forwarding
fast-forwarding enable
!
ppp account username windows1 password windows1pass
ppp account username windows2 password windows2pass
ppp account username test1@example.jp password test1pass
!
ipsec nat-traversal enable
!
l2tp udp source-port 1701
!
l2tpv3 udp source-port 40001
!
ipsec local policy 1
 address ip
!
!
ipsec isakmp policy 1
 description RemoteAccess
 authentication pre-share ipseckey
 hash sha1
 encryption aes128
 group 5
 lifetime 86400
 isakmp-mode main
 remote address ip any
 local policy 1
!
!
ipsec tunnel policy 1
 description RemoteAccess
 set transform esp-aes128 esp-sha1-hmac
 no set pfs
 set key-exchange isakmp 1
 set sa lifetime 28800
 match protocol l2tp-smartphone nat-traversal
!
!
l2tp 1
 tunnel address any ipsec
 tunnel mode lns
 tunnel virtual-template 0
!
interface virtual-template 0
 ip address 192.168.10.1/32
 no ip redirects
 no ip rebound
 ip tcp adjust-mss auto
 peer ip proxy-arp
 peer ip pool RAC
!
interface ppp 0
 ip address 10.10.10.1/32
 no ip redirects
 ip tcp adjust-mss auto
 ip access-group in ppp0_in
 ip masquerade
 ip spi-filter
 ppp username test1@example.jp
 ipsec policy 1
!
interface ethernet 0
 ip address 192.168.10.1/24
!
interface ethernet 1
 no ip address
 pppoe-client ppp 0
!
dns
 service enable
!
syslog
 local enable
!
!
!
system led ext 0 signal-level mobile 0
!
!
!
!
!
!
ip route 0.0.0.0/0 ppp 0
!
ip local pool RAC address 192.168.10.10 192.168.10.11
!
ip access-list ppp0_in permit any 10.10.10.1 udp any 500
ip access-list ppp0_in permit any 10.10.10.1 udp any 4500
ip access-list ppp0_in permit any 10.10.10.1 50
!
!
!
end